Post problems flowchart – HP ProLiant DL380 User Manual
Page 82
Troubleshooting 82
POST problems flowchart
Symptoms:
•
Server does not complete POST
NOTE:
The server has completed POST when the system attempts to access the boot device.
•
Server completes POST with errors
Possible problems:
•
Improperly seated or faulty internal component
•
Faulty KVM device
•
Faulty video device
Item Refer
to
1
"POST error messages and beep codes (on page
2
"Video problems" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
(
3
KVM or iLO 2 documentation
4
"Loose connections (on page
5
"Symptom information (on page
6
Server maintenance and service guide, located on the Documentation
CD or the HP website (
7
"Port 85 and iLO messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(
8
"General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website (
9
•
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(
•
Server maintenance and service guide, located on the Documentation
CD or the HP website
(
10
•
"Server information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website (
•
"Operating system information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website (