HP ProLiant DL380 - Manual (Page 48)

Hardware options installation 48
2. Install the hard drive.
3. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (" SAS and
SATA hard drive LED combinations " on page 17 ).
Removing a hot-plug SAS hard drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
1. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (" SAS and
SATA hard drive LED combinations " on page 17 ).
2. Back up all server data on the hard drive.
3. Remove the hard drive.
Media drive option
1. Power down the server (on page 22 ).