HP ProLiant DL380 - Manual (Page 72)

Troubleshooting 72
Troubleshooting
In this section
Troubleshooting resources ....................................................................................................................... 72
Pre-diagnostic steps ................................................................................................................................ 72
Loose connections .................................................................................................................................. 75
Service notifications................................................................................................................................ 76
Troubleshooting flowcharts ...................................................................................................................... 76
POST error messages and beep codes...................................................................................................... 87
Troubleshooting resources
The HP ProLiant Servers Troubleshooting Guide provides simple procedures for resolving common
problems as well as a comprehensive course of action for fault isolation and identification, error message
interpretation, issue resolution, and software maintenance.
To obtain the guide, refer to any of the following sources and then select the HP ProLiant Servers
Troubleshooting Guide:
• The server-specific Documentation CD
• The Business Support Center on the HP website ( http://www.hp.com/support ). Navigate to the
server technical support page. Under self-help resources, select ProLiant Troubleshooting Guide.
• The Technical Documentation website ( http://www.docs.hp.com ). Select Enterprise Servers,
Workstations and Systems Hardware, and then the appropriate server.
Pre-diagnostic steps
WARNING: To avoid potential problems, ALWAYS read the warnings and cautionary
information in the server documentation before removing, replacing, reseating, or modifying
system components
IMPORTANT: This guide provides information for multiple servers. Some information may not
apply to the server you are troubleshooting. Refer to the server documentation for information
on procedures, hardware options, software tools, and operating systems supported by the
server.
1. Review the important safety information (on page 72 ).
2. Gather symptom information (on page 74 ).
3. Prepare the server for diagnosis (on page 75 ).
4. Use the Start diagnosis flowchart (on page 76 ) to begin the diagnostic process.
Important safety information
Familiarize yourself with the safety information in the following sections before troubleshooting the server.