HP ProLiant DL380 - Manual (Page 54)

Hardware options installation 54
5. Remove the expansion slot cover.
Installing an expansion board (slot 3, 4, or 5)
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
1. Power down the server (on page 22 ).
2. Extend the server from the rack (on page 22 ).
3. Remove the access panel (on page 23 ).
4. Remove the PCI riser cage (on page 24 ).
5. Remove the expansion slot cover.
6. Unlock the PCI retaining clip.