HP 850 - Manual (Page 95)

Appendix B: Camera dock 95
Appendix B:
Camera dock
NOTE The HP Camera Dock does not work without AC power.
Be sure to use ONLY the HP AC adapter and the cables
that came with the Camera Dock.
1 Follow the setup instructions provided with the Camera
Dock. This includes installing the Dock Insert onto the dock,
installing (optional) rechargeable batteries in the camera,
connecting the AC power source, and connecting the
Camera Dock to a computer, printer, and/or television.
2 Remove any cables that may be
attached to the camera before
putting it in the dock.
3 Place the camera in the Camera
Dock with the rear of the camera
facing the front of the Camera Dock.
The Camera Dock has three I/O
connectors on the back:
—Connects to the television
—Connects directly to USB-enabled
HP DeskJet and Photosmart printers
—Connects to your computer
There is a sliding door over the printer and computer
connectors that prevents you from using both connectors at the
same time (the Camera Dock is not a USB hub).