Printing images – HP 850 User Manual
Page 60
60
hp photosmart 850 user’s manual
3
Turn on the camera. The HP Image Unload software will
launch on your computer. If you have set the software to
automatically unload the images in the camera, the images
will automatically unload to the computer. Otherwise, in the
Welcome
screen, click
Start Unload
. If there were any
images in the camera that were selected in the
Share
menu
for printing or e-mail, those actions are started after the
images have been unloaded to the computer.
4
When the unload screen on the computer says
Finished
,
your images have been saved and shared. You can now
disconnect the camera from the computer.
NOTE
To unload the camera images to a computer that does
not have the HP Photo & Imaging software installed on it,
switch the camera to the
Disk Drive
setting in the
USB
Configuration
sub-menu of the
Setup
menu. This allows
the camera to appear as another disk drive on the
computer so that you can easily copy the image files from
the camera to the hard drive of your computer. For more
Printing images
NOTE
You can also use the optional HP Camera Dock to do
To print images that have been unloaded to the computer, you
can use the HP Photo & Imaging software that was shipped
with the camera.
You can also connect the camera directly to any HP DeskJet or
Photosmart printer that has a USB connection, then print
images selected from the camera
Share
menu or all images in
the camera.