Harbor Freight Tools DUAL MIG 93793 - Manual (Page 5)

Page 5 For technical questions, please call 1-800-444-3353. SKU 93793
tool will do the job better and safer at the
rate for which it is designed.
Do not use the power tool if the power
3.
Switch does not turn it on or off. Any
tool that cannot be controlled with the
Power Switch is dangerous and must be
replaced.
Disconnect the power cord plug from
4.
the power source before making any
adjustments, changing accessories,
or storing the tool. Such preventive
safety measures reduce the risk of
starting the tool accidentally.
Store idle tools out of reach of
5.
children and other untrained persons.
Tools are dangerous in the hands of
untrained users.
Maintain tools with care. Keep cutting
6.
tools sharp and clean. Properly
maintained tools with a sharp cutting
edge are less likely to bind and are
easier to control. Do not use a damaged
tool. Tag damaged tools “Do not use”
until repaired.
check for misalignment or binding of
7.
moving parts, breakage of parts, and
any other condition that may affect
the tool’s operation. If damaged,
have the tool serviced before using.
Many accidents are caused by poorly
maintained tools.
use only accessories that are
8.
recommended by the manufacturer
for your model. Accessories that may
be suitable for one tool may become
hazardous when used on another tool.
SerVIce
tool service must be performed only 1.
by qualified repair personnel. Service
or maintenance performed by unqualified
personnel could result in a risk of injury.
When servicing a tool, use only 2.
identical replacement parts. Follow
instructions in the “Inspection,
Maintenance, And Cleaning” section
of this manual. Use of unauthorized
parts or failure to follow maintenance
instructions may create a risk of electric
shock or injury.