Harbor Freight Tools DUAL MIG 93793 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. SKU 93793
prODuct SpecIFIcatIOnS
Welding Current 35 ~ 140 A
Duty Cycle 18% @ 140 A / 100% @ 45 A
(Refer to chart and explanation on page 18)
Power Consumption 240 V~ / 60 Hz / 25 A
(Connect to a 25 A minimum dedicated circuit)
Open Voltage 15.5 - 20 V
Required Power Plug Type 3-Prong, 240 V~, polarized, twist lock (not included)
NEMA #L6-30 or equivalent
Power Cord Rating 12 AWG x 3C x 6’ Long
Gas Inlet Size 1/4”
Ground Cable 4 Gauge / 6’ Long
Torch Power Cable 8 Gauge / 6’ Long
Thermal Overload Protection (with Light) Automatic shutdown and restart after cool down
Wire Size 0.23” to 0.035”
Wire Spool Size 7-3/4” Diameter
Included Torch Tip Size 0.030”
Accessories Wheel Kit / Wire Spool / Torch Assy. / Grounding Clamp
Wire Brush & Hammer / Spare 1.0 & 0.8 Welding Tips
Hand-Held Face Shield
Net Weight 103 lb.
SaVe thIS Manual
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover. Keep
this manual and invoice in a safe and dry place for future reference.
General SaFetY ruleS
WarnInG!
reaD anD unDerStanD all InStructIOnS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SaVe theSe InStructIOnS
WOrK area
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
2.
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust
or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.