Harbor Freight Tools 65076 - Manual

24 ton log splitter
65076
set up, operating, and servicing
instructions
Warning!
iMportant inForMation
The Hitch Coupler MUST be properly
secured to the hitch ball of the towing vehicle.
After assembly and attachment, pull up and
down on the Hitch Coupler to make sure the
hitch ball is fitting snugly in the Hitch Coupler.
there must be no play between the hitch
ball and Hitch coupler. If there is play, tighten
the Adjustment Nut until no play is present. If
the Adjustment Nut is too tight, the Handle
will not lock. carefully read and follow
the complete instructions in this manual
BeFore setup or use.
if the coupler is not secured
properly, the ball could come loose
while the log splitter is in motion,
possibly causing property damage,
serious personal injury, or
deatH.
distributed exclusively by Harbor Freight tools ® .
3491 Mission Oaks Blvd., Camarillo, CA 93011
visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
save tHis Manual.
Copyright © 2008 by Harbor Freight Tools ® . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.