Harbor Freight Tools DUAL MIG 93793 - Manual (Page 33)

IMpOrtant!
Be certaIn to shut off the Welder, disconnect it from power, and discharge the torch to
ground before adjusting, cleaning, or repairing the unit.
SKU 93793 For technical questions, please call 1-800-444-3353. Page 33
If the steps above do not solve the problem or if the repairs involved are too
complex, contact a qualified technician.
troubleshooting (continued)
Wire Feeds, but Shielding gas does not Flow
pOSSIBle cauSeS anD SOlutIOnS
empty Gas cylinder: 1.
Check gas cylinder.
nozzle plugged:
2.
Clean nozzle. If damaged, replace.
regulator or cylinder valve closed:
3.
Make sure both valves are adjusted properly.
Gas line blocked:
4.
Check external hose, and hose within Torch cable.
Gas solenoid broken or not connected properly:
5.
Have a qualified technician check/replace.
lIMIteD 1 Year / 90 DaY
WarrantY
Harbor Freight Tools Co. makes every
effort to assure that its products meet high quality
and durability standards, and warrants to the
original purchaser that for a period of ninety days
from date of purchase that the torch, liner, wire
feed mechanism (if applicable), welding clamps,
electrode holders, cables and accessories packed
with the welder are free of defects in materials
and workmanship. this limited 90 Day/1 Year
Warranty shall not apply to consumable parts
such as tips, welding wire, and gas nozzles.
Harbor Freight Tools also warrants to the original
purchaser, for a period of one year from date of
purchase, that the transformer and rectifier are
free from defects in materials and workmanship
(90 days if used by a professional contractor or
if used as rental equipment). This warranty does
not apply to damage due directly or indirectly to
misuse, abuse, negligence or accidents, repairs
or alterations outside our facilities, normal wear
and tear, or to lack of maintenance. We shall in
no event be liable for death, injuries to persons or
property, or for incidental, contingent, special or
consequential damages arising from the use of our
product. Some states do not allow the exclusion or
limitation of incidental or consequential damages,
so the above limitation of exclusion may not apply
to you. THIS WARRANTY IS ExPRESSLY IN LIEU
OF ALL OTHER WARRANTIES, ExPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the
product or part must be returned to us with
transportation charges prepaid. Proof of purchase
date and an explanation of the complaint must
accompany the merchandise. If our inspection
verifies the defect, we will either repair or replace
the product at our election or we may elect to
refund the purchase price if we cannot readily and
quickly provide you with a replacement. We will
return repaired products at our expense, but if we
determine there is no defect, or that the defect
resulted from causes not within the scope of our
warranty, then you must bear the cost of returning
the product.
This warranty gives you specific legal rights
and you may also have other rights which vary
from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 •
Camarillo, CA 93011 • (800) 444-3353