HP AFICIO SP 8100DN - Manual (Page 57)

Connecting the Printer
46
3
Using the Gigabit Ethernet cable
A
For using the gigabit ethernet cable, attach one ferrite core at the printer
end of the Ethernet cable, and attach the other ferrite core about 10 cm (4
inches) ( ) from this core making a loop as shown.
B
Connect the ethernet cable to the gigabit ethernet board.
C
Connect the other end of the cable to the printer's network, such as a hub.
Note
❒ The printer's ethernet and USB ports are not available when the gigabit
ethernet board is attached to the printer.
Reference
For details about network environment settings, see Software Guide.
For details about attaching the gigabit ethernet board, see p.38 “Attaching
Gigabit Ethernet Board”.
AQV564S
AQV551S