Medium partitions mode page – HP C737990900 User Manual
Page 85
Commands 85
Co
m
m
an
ds
Medium Partitions Mode Page
The Medium Partitions Mode Page has the following format. Note that none of
the fields are changeable. The Partition Size will be patronized.
Rsmk
0 The Report Set Marks flag should be clear since this feature is not supported.
AVC
0 The Automatic Velocity Control flag should be clear since velocity control is managed by the
drive.
SOCF
0 The Stop On Consecutive Filemarks flag should be clear since this feature is not supported.
RBO
0 The Recover Buffer Order flag should be clear since this feature is not supported.
REW
0 The Report Early Warning on read flag should be clear since this feature is not supported.
Gap Size
0 There is no concept of inter-block gaps in the format.
EOC Defined
0
EEG
0 The Enable EOD Generation flag should be set since EOD generation is always enabled.
SEW
1 The Synchronize at Early Warning flag should be set since this feature is supported.
Buffer Size at
Early Warning
0 The Buffer Size at Early Warning field should be zero as this cannot be set.
7
6
5
4
3
2
1
0
0
Page Code (11h)
1
Page Length (08h)
1
Maximum Additional Partitions (0)
1
Additional Partitions Defined (0)
2
FDP (0)
SDP (0)
IDP (0)
PSUM (11b)
POFM (0) CLEAR (0) ADDP (0)
1
Medium Format Recognition (3)
3
Reserved (0)
Partition Units (9)
4–7
Reserved (0)
8
Partition Size
9