beautypg.com

Hestan 30 Inch Freestanding Professional Gas Range Installation Manual User Manual

Page 3

background image

EN

©2019 Hestan Commercial Corporation

1

When properly cared for, your Hestan appliance will provide safe, reliable service for many years.

When using this appliance, basic safety practices must be followed as outlined below.
IMPORTANT: Save these instructions for the local Gas or Utility Inspector’s use.
INSTALLER: Please leave these Installation Instructions with the owner.
OWNER: Please retain these Installation Instructions for future reference.
This range is NOT designed for installation in manufactured (mobile) homes or recreational park

trailers. Do NOT install this range outdoors.

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

ELECTRICAL SHOCK HAZARD

Disconnect power before installing or servicing appliance. Before turning

power ON, be sure all controls are in the OFF position. Failure to do so can

result in electrical shock or death.

ELECTRICAL GROUNDING

This appliance must be grounded. Grounding reduces the risk of electric

shock in the event of a short circuit. Read the ELECTRICAL CONNECTIONS

section of this manual for complete instructions.
This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard

and should be directly plugged into a properly grounded receptacle. Do not cut or remove the

grounding prong from this plug.

ELECTRICAL SUPPLY

The appliance must be on its own dedicated circuit - 120 VAC, Single Phase, 60 Hz, with a current

rating as shown in the model number listing on pg. 2. Have the installer show you where the

electric circuit breaker is located so you know how to shut off the power to this appliance. It is the

responsibility of the user to have the appliance connected by a licensed electrician in accordance

with all local codes, or in the absence of local codes, in accordance with the National Electrical

Code. Read the ELECTRICAL CONNECTIONS section of this manual for complete details.

TABLE OF CONTENTS

1

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

2

MODEL NUMBERS

3

RATING LABEL

3

REGULATORY / CODE REQUIREMENTS

3

LOCATION AND INSTALLATION / VENTILATION

10 BACKGUARD AND ACCESSORIES
10 INSTALLATION OF ANTI-TIP DEVICE
12 ELECTRICAL CONNECTIONS
13 GAS CONNECTION
15 FINAL SETUP
16 SERVICE
17 APPENDIX