beautypg.com

Steam functions (steam models) – LG 27 Inch Electric Smart Dryer Owner Manual User Manual

Page 56

background image

56

TROUBLESHOOTING

Steam Functions (Steam Models)

Problem

Possible Cause

Solutions

Water drips from nozzle

when STEAM CYCLE

starts

This is normal.

This is steam condensation. The dripping

water will stop after a short time.

Garments still wrinkled

after Steam Fresh

TM

Too many or overly different

types of garments in dryer.

Small loads of 1 to 5 items work best.
Load fewer garments. Load similar types

of garments.

Creases or pleats are

gone from garments

after Steam Fresh

TM

The function of this cycle is to

remove wrinkles from fabric.

Use an iron to replace creases and pleats

in garments.

Garments have static

after using the Reduce

Static option

This is normal.

The amount of static experienced will

depend on the individual moisture level in

the skin.

Garments are too damp

or too dry after using

the Reduce Static

option

Correct drying options not

selected.

Select the load weight manually before

starting the Reduce Static option.

Garments are not

uniformly damp after

using the Easy Iron

option

Number of garments or load

size not properly selected at the

beginning of the cycle.

Select the correct number of garments or

load size before starting the cycle.

Steam does not

generate, but no error

code is shown

Water level error.

Unplug dryer and call for service.

Water drips from door

during STEAM CYCLE

This is normal.

Condensation will normally form on the

inside of the dryer door during steam

operation. Some condensation may drip

out the bottom of the door.

Steam is not visible

during STEAM CYCLE

This is normal.

Steam vapor is difficult to see when the

door is closed. However, condensation

will normally form on the inside of

the dryer door if the steam system is

operating normally.

Drum does not turn

during STEAM CYCLE

This is normal.

The drum is turned off so that the steam

vapor remains in the drum. The drum will

normally turn for about 2 seconds once a

minute.

Cannot see steam

vapor at the beginning

of cycle

This is normal.

Steam is released at different stages of

the cycle for each option.

Odors remain in

clothing after Steam

Fresh

TM

Steam Fresh

TM

did not remove

odor completely.

Fabrics containing strong odors should be

washed in a normal cycle.