LG 27 Inch Electric Smart Dryer Owner Manual - Manual (Page 43)

43 OPERATION
Steam Functions
LG’s new steam technology allows you to inject
fabrics with a swirling jet of hot steam to refresh
clothes and reduce static, or sanitize clothes.
Simply select the Steam Fresh™ cycle or the Steam
Sanitary™ cycle. Or you can add a steam option to
selected cycles.
Using the Steam Fresh™ cycle
Steam Fresh™ uses the power of steam alone to
quickly reduce wrinkles and odors in fabrics. It brings
new life to wrinkled clothes that have been stored for
an extended time. Steam Fresh™ can also be used
to help reduce odors and remove the hanger creases
in fabrics.
NOTE
• Depending on the load size, change the cycle time
by pressing More Time or Less Time. The display
shows 1, 3, 5, or . Select 3 for up to three
items; select 5 for four or five items; and select
for a large load, a bulky item like a blanket,
or to remove hanger creases.
To use the Steam Fresh™ cycle:
1 Turn on the dryer and turn the cycle selector
knob to select the Steam Fresh™ cycle.
2 To add an option function, select Wrinkle Care.
3 Depending on the load (quantity of items), steam
time can be changed by pressing the More Time
or Less Time buttons.
4 Press Start/Pause button to start the cycle.
Using the Steam Sanitary™ cycle
The new Steam Sanitary™ cycle is ideal for sanitizing
non-washable items quickly and easily using the
power of steam alone. This cycle is recommended for
use with cotton and polyester materials. (Do NOT use
for urethane foam, down feathers or delicate items.)
Using the Steam Option
The Reduce Static option injects steam late in the
drying cycle to reduce the static electricity caused
by dry fabrics rubbing together. Change the amount
of time for the cycle by pressing the More Time or
Less Time button, depending on the load (quantity
of items). The display will show the recommended
number of items, such as 7, 9, 11, 14, 16, or 18.
TurboSteam helps prevent the overdrying of clothes
by injecting steam during the drying process.
NOTE
• When Sensor Dry is selected with the Reduce
Static or Turbo Steam option, a Dry level of Less
or Damp cannot be selected.
• The Reduce Static option may also be selected
during Time Dry cycles.
• After the Steam option is selected in Time Dry, the
More Time or Less Time buttons will change the
steam time only.
• After pressing Start/Pause, the More Time or Less
Time buttons will be disabled.
To add steam to a standard cycle:
1 Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
2 Use the cycle setting buttons to adjust the
settings for that cycle.
3 Press the steam option button for the steam
option you would like to add. Then adjust for
the load size using the More Time or Less Time
buttons.
4 Press Start/Pause to start the cycle.