Epson Multimedia Storage Viewer P-4000 User Manual
Page 48
48
Follow these steps to connect the P-4000 to your TV:
1
Connect the three RCA plugs to the video and audio
IN
jacks on your TV.
2
Connect the mini-plug on the other end of the cable
to the
A/V Out
connector on the side of the P-4000.
The P-4000 LCD screen turns off.
3
Set the TV to display video input from the P-4000.
Note:
If you need to change the Video Out setting to match
your TV, see the P-4000 User’s Guide.
Some TVs may crop your images on the top and bottom.
You can now use all of the P-4000 controls to play slide
shows, photos, and videos on your TV.
P4000Basics.book Page 48 Thursday, August 18, 2005 8:26 AM