Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) - Manual (Page 90)

About this task
The following image indicates the location of the display back cover and provides a visual representation of the installation
procedure.
Steps
Place the display back cover on a flat surface.
Next steps
1. Install the display hinge .
2. Install the sensor board .
3. Install the eDP/display cable .
4. Install the camera module .
5. Install the display panel .
6. Install the display bezel .
7. Install the display assembly .
8. Install the wireless card .
9. Install the base cover .
10. Install the microSD card .
11. Follow the procedure in After working inside your computer .
Dummy SIM-card slot filler
Removing the dummy SIM-card slot filler
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the microSD card .
3. Remove the base cover .
4. Remove the 2280 solid-state drive or 2230 solid-state drive .
5. Remove the memory modules .
6. Remove the battery .
90 Removing and installing components