Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) - Manual (Page 42)

Next steps
1. Install the assembly inner frame .
2. Install the battery .
3. Install the base cover .
4. Install the microSD card .
5. Follow the procedure in After working inside your computer .
System board
Removing the system board
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the microSD card .
3. Remove the base cover .
4. Remove the 2280 solid-state drive or 2230 solid-state drive .
5. Remove the battery .
6. Remove the wireless card .
7. Remove the assembly inner frame .
8. Remove the heat sink .
About this task
The following image indicates the connectors on your system board.
Figure 1. System board connectors
42 Removing and installing components