beautypg.com

Installing the edp cable – Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) User Manual

Page 83

background image

Steps

1. Disconnect the eDP/display cable from the connector on the camera module.
2. Peel the conductive tape and unroute the eDP/display cable to release it from adhesive and lift the eDP/display cable from

the display back cover.

Installing the eDP cable

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the eDP cable and provide a visual representation of the installation procedure.

Removing and installing components

83