Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) - Manual (Page 84)

Steps
1. Connect the eDP/display cable to the connector on the camera.
2. Adhere the eDP/display cable to the display back cover.
3. Adhere the conductive tape and route the eDP/display cable to the display back cover.
Next steps
1. Install the display panel .
2. Install the display bezel .
3. Install the display assembly .
4. Install the wireless card .
5. Install the base cover .
6. Install the microSD card .
7. Follow the procedure in After working inside your computer .
Sensor board
Removing the sensor board
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the microSD card .
84 Removing and installing components