Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) User Manual
Page 105
Table 9. System setup options—Connection menu (continued)
Connection
By default, the
Bus Mode PCIe
option is enabled.
WLAN
Enable or disable the internal WLAN device
By default, the option enabled.
Bluetooth
Enable or disable the internal Bluetooth device
By default, the option enabled.
Contactless smartcard/NFC
Enable or disable the internal Contactless smartcard/NFC device
By default, the option enabled.
Enable UEFI Network Stack
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the
Enable UEFI Network Stack
option are enabled.
Wireless Radio Control
Control WLAN radio
Sense the connection of the computer to a wired network and subsequently
disable the selected wireless radios (WLAN).
By default, the option is disabled.
Control WWAN radio
Sense the connection of the computer to a wired network and subsequently
disable the selected wireless radios (WWAN).
By default, the option is disabled.
HTTPs Boot Feature
HTTPs Boot
Enable or disable the HTTPs Boot feature.
By default, the
HTTPs Boot
option is enabled.
HTTPs Boot Mode
With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.
By default, the
Auto Mode
option is enabled.
Table 10. System setup options—Power menu
Power
Battery configuration
Enables the computer to run on battery during peak power usage hours. Use
the table
Custom Charge Start
and
Custom Charge Stop
, to prevent AC
power usage between certain times of each day.
By default, the
Adaptive
option is enabled.
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Enable or disable the advanced battery charge configuration.
By default, the
Enable Advanced Battery Charge Configuration
option is
disabled.
Peak Shift
Enables the computer to run on battery during peak power usage hours.
By default, the
Enable Peak Shift
option is enabled.
Enable Peak Shift
USB PowerShare
Enable USB PowerShare
Enable or disable the USB PowerShare.
By default, the
Enable USB PowerShare
option is disabled
BIOS setup
105