Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) - Manual (Page 61)

Steps
1. Align and place the keyboard on the keyboard bracket.
2. Replace the five (M2x2) screws to secure the keyboard to the keyboard bracket.
Next steps
1. Install the keyboard assembly .
2. Install the system board .
3. Install the heat sink .
4. Install the assembly inner frame .
5. Install the battery .
6. Install the memory modules .
7. Install the wireless card .
8. Install the 2280 solid-state drive or 2230 solid-state drive .
9. Install the base cover .
10. Install the microSD card .
11. Follow the procedure in After working inside your computer .
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the microSD card .
3. Remove the base cover .
4. Remove the wireless card .
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
Removing and installing components 61