Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) - Manual (Page 76)

Steps
1. Connect the display cable to the connector on the display panel and close the latch.
2. Adhere the clear tape to cover the display cable connector.
3. Adhere the conductive tape to secure the display cable to the display panel.
4. Close the display panel and the display back cover to assemble.
NOTE: Ensure that the display panel tabs are inserted into the slots on the display cover.
5. Replace the two (M2.5x3) screws to secure the display panel to the display back cover.
Next steps
1. Install the display bezel .
2. Install the display assembly .
3. Install the wireless card .
4. Install the base cover .
5. Install the microSD card .
6. Follow the procedure in After working inside your computer .
Camera
Removing the camera
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the microSD card .
76 Removing and installing components