Epson Optio 430 - Manual (Page 8)

● Approximate Operating Time (when fully charged)
Number of recordable images
LCD monitor ON LCD monitor OFF
Playback time
With the flash
fired for 50%
Approx. 130 Approx. 160
Approx. 75 min.
of the shots
Without the flash Approx. 160 Approx. 200
* The above table is based on Pentax measuring conditions and may vary
depending on capture mode and shooting conditions.
Performance of the battery may deteriorate in low tempera-
tures.
● Battery Level Indicator
You can check the battery level by the
symbol displayed on
the LCD monitor.
(lit green) : Adequate power remains.
↓
(lit green) : Battery is running low.
↓
(lit yellow) : Battery is running very low.
↓
(lit red) : Battery is exhausted.
↓
[Battery depleted] : After the message is displayed, the camera
will turn off.
Caution Using the AC Adapter (optional)
If you intend to use the LCD monitor for a long time or connect the
camera to a PC, use of the AC adapter D-AC2 (optional) is recom-
mended.
z
Connect the AC plug cord to the AC adapter.
x
Plug the AC plug cord into the power outlet.
c
Open the terminal cover of your camera and connect the
AC adapter to the DC input terminal.
When using the AC adapter, the battery level indicator is not dis-
played on the LCD monitor.
• Make sure that the camera is turned off before connecting
the AC adapter.
• When using the AC adapter D-AC2, be sure to read the
operation manual accompanying the AC adapter.
Caution
memo
13
Getting Star
ted
12
Getting Star
ted
Terminal cover AC adapter
AC plug cord
KB320(01-17)E.QE33 9/12/01 2:27 PM Page 12