Canon EOS RP Mirrorless Camera User Manual
Page 571
571
Troubleshooting
Movie recording stops by itself.
z
If the card’s writing speed is slow, movie recording may stop
automatically. For cards that can record movies, see
585. To find out
the card’s writing speed, refer to the card manufacturer’s website, etc.
z
If you shoot a movie for 29 min. 59 sec., the movie recording will stop
automatically.
The ISO speed cannot be set for movie recording.
z
In shooting modes other than
[
M
]
, the ISO speed is set automatically. In
[
M
]
mode, you can manually set the ISO speed (
ISO 100 cannot be set or ISO speed expansion cannot be
selected during movie recording.
z
Check the
[ISO speed range]
and
[Range for
H
]
setting under
[
z
:
k
ISO speed settings]
.
z
When
[
z
: Highlight tone priority]
is set to
[Enable]
, the available ISO
speed range starts at ISO 200. Expanded ISO speed cannot be selected
even if you set an expanded range for
[ISO speed range]
or
[Range
for
H
]
under
[
z
:
k
ISO speed settings]
. When
[
z
: Highlight tone
priority]
is set to
[Disable]
137), you can set ISO 100/125/160 or
an expanded ISO speed.