Canon EOS RP Mirrorless Camera - Manual (Page 107)

107
Long (Bulb) Exposures
o With [
z
Long exp. noise reduction] , you can reduce the noise generated
during long exposures ( = 159).
o For bulb exposures, using a tripod and bulb timer is recommended.
o You can also shoot bulb exposures by using Remote Switch RS-60E3 (sold
separately, = 219).
o You can also use Wireless Remote Control BR-E1 (sold separately) for bulb
exposures. When you press the remote control’s transmit button, the bulb
exposure will start immediately or 2 sec. later. Press the button again to stop
the bulb exposure.
Bulb Timer
M
You can preset the bulb exposure’s exposure time. The bulb timer eliminates
the need to keep holding down the shutter button during the bulb exposure.
This reduces camera shake.
The bulb timer can be set only in the <
F
> (bulb exposure). It cannot be set
(or will not function) in any other mode.
1
Select [
z
: Bulb timer].
2
Select [Enable].
z
Select [Enable] , then press the <
B
>
button.