Canon EOS RP Mirrorless Camera - Manual (Page 130)

130
Auto Exposure Bracketing (AEB)
o If [
z
: Auto Lighting Optimizer] ( = 136) is set to any setting other than
[Disable] , the effect of AEB may be reduced.
o <
A
> blinks in the lower left of the screen during AEB shooting.
o If the drive mode is set to <
u
>, press the shutter button three times for each
shot. When <
o
> or <
i
> is set and you hold down the shutter button
completely, the three bracketed shots will be taken consecutively and the
camera will automatically stop shooting. When < m > or <
l
> is set, the
three bracketed shots will be taken consecutively after a 10-sec. or 2-sec.
delay. When set to <
q
>, three times the specified number of shots are taken
in continuous shooting.
o You can set AEB in combination with exposure compensation.
o AEB cannot be used with flash, Multi Shot Noise Reduction, focusing
bracketing, or in HDR mode.
o AEB will be canceled automatically if you do any of the following: Setting the
power switch to <
2
> or when the flash is fully charged.