Explore Scientific 7-in-1 Sensor for 7-in-1 Wi-Fi Weather Station User Manual

Page 8

Step 2:

Fasten the stainless steel pole on

your fix pole (purchase separately)

with U-bolts, pole mounting clamps

and nuts.

Fixed pole

(not included)

MOUNTING POLE AND DIRECTION ALIGNMENT

Install the wireless 7-IN-1 sensor in an open

location with no obstructions above and around the

sensor for accurate rain and wind measurement.

Install the sensor with the smaller end facing the

North to properly orient the wind direction vane.

Secure the mounting stand and bracket (included)

to a post or pole, and allow minimum 1.5m off the

ground.

Point to

NORTH

1.5 meter

off the

ground

Fixed pole

package not

included

Add rubber

pad before

mounting on

pole or post

Install the wireless 7-IN-1 sensor in an open location

with no obstructions above and around the sensor for

accurate rain and wind measurement. Install the sensor

with the smaller end facing the North to properly orient

the wind direction vane. Secure the mounting stand and

bracket (included) to a post or pole, and allow minimum

1.5m off the ground.