Explore Scientific 7-in-1 Sensor for 7-in-1 Wi-Fi Weather Station - Manual (Page 24)

24
RAIN
The RAINFALL section shows the rainfall or rain rate information.
TO SET THE RAINFALL UNIT
1. Press and hold [ RAIN ] key for 2 seconds to enter unit setting mode.
2. Press [ ] or [ ] key to toggle the unit between mm and in (rainfall) or mm/h and in/h
(rain rate).
3. Press [ RAIN ] key to confirm and exit the setting.
TO SELECT THE RAINFALL DISPLAY MODE
Press [ RAIN ] key to toggle between:
1. HOURLY - the total rainfall in the past hour
2. DAILY - the total rainfall from midnight (default)
3. WEEKLY - the total rainfall of the current week
4. MONTHLY - the total rainfall of the current calendar month
5. Total - the total rainfall since the last reset
Period of rainfall
6. Rate - Current rainfall rate (base on 10 min rain data)
Rain rate level
Rain rate level definition:
Level 1:
Light rain
0.1~ 2.5 mm/h
Level 2:
Moderate
2.51 ~ 10.0 mm/h
Level 3:
Heavy rain
10.1 ~ 50.0 mm/h
Level 3
Violent rain:
> 50.0 mm/h
TO RESET THE TOTAL RAINFALL RECORD
In normal mode, press and hold [ HISTORY ] key for 2 seconds to reset all the rainfall record.
NOTE:
To ensure to have correct data, please reset all the rainfall record when you reinstall your
wireless 7-IN-1 sensor to other location
LIGHT INTENSITY, UV INDEX & SUNBURN TIME
This section of display show the sunlight intensity, UV index and sunburn time. Press the [ SUN
] key to change the mode.
LIGHT INTENSITY MODE:
1. During light intensity mode, press and hold [ SUN ] key for
2 seconds to enter unit setting
2. press [ ] or [ ] key change the unit in sequence: Klux
→ Kfc → W/m².
3. Press [ SUN ] key to confirm and exit the setting.
UV INDEX MODE:
To show the currect UV index detected by the
outdoor sensor. Corresponding exposure level and
suggested protection indicator are also displayed.
Exposure level
Suggest
protection
indicator