Explore Scientific 7-in-1 Sensor for 7-in-1 Wi-Fi Weather Station - Manual (Page 26)

26
WEATHER ALERT SETTING
Weather Alert can alert you of certain weather conditions. Once the alert criterion is met, the
alarm sound will activate and the LCD’s alert icon will flash.
TO SET ALERT
1. Press [ ALERT ] to select and display the desired weather alert reading in the sequence
listed in the table below:
Alert reading Sequence Setting Range Display Section Default
Outdoor Temperature High Alert
-40°C ~ 80°C
Outdoor temperature &
humidity
40°C
Outdoor Temperature Low Alert 0°C
Outdoor Humidity High Alert
1% ~ 99%
80%
Outdoor Humidity Low Alert 40%
Indoor Current Channel
Temperature High Alert
-40°C ~ 80°C
Indoor CH temperature
& humidity
40°C
Indoor Current Channel
Temperature Low Alert
0°C
Indoor Current Channel
Humidity High Alert
1% ~ 99%
80%
Indoor Current Channel
Humidity Low Alert
40%
Average Wind Speed 0.1m/s ~ 50m/s Wind direction & speed 17.2m/s
Feels Like High Alert
-65°C ~ 50°C
Weather index
20°C
Feels Like Low Alert 0°C
Dewpoint High Alert
-40°C ~ 80°C
10°C
Dewpoint Low Alert -10°C
Heat Index High Alert 26°C ~ 50°C 30°C
WindChill Low Alert -65°C ~ 18°C 0°C
UV index High Alert 1 ~16
UV & light intensity
10
Light intensity High Alert 0.01 ~ 200.0Klux 100Klux
Pressure Drop 1hPa ~ 10hPa Barometer 3hPa
Hourly Rainfall 1mm ~ 1000mm Rainfall 100mm
2. Under the current alert reading, press and hold [ ALERT ] key for 2 seconds to enter alert
setting and the alert reading will flash.
3. Press [ ] or [ ] key to adjust the value or press and hold the key to change rapidly.
4. Press [ ALERT ] key to confirm the value.
5. Press [ ALARM ] key to toggle the regarding alert on / off.
6. Press [ ALERT ] key to shift to next alert reading.
High / Low
Alert on
Alert off
Alert on Alert off
7. Press any key on the front side to save alert on /off status and back to normal mode, or it
will automatically back to normal mode after 30 seconds without pressing any key.
TO SILENCE THE ALERT ALARM
Press [ALARM / SNOOZE] key to silence the alert alarm or let the alarm automatically turn off
after 2 minutes.