Extron electronic Fiber Optics Fox 4G DA8 - Manual (Page 20)

FOX 4G DA8 • Reference Information
Reference Information
FOX 4G DA8 • Reference Information A-2 A-3
Specifications
Optical specifications
N These amplifiers are class 1 laser products. They meet the
safety regulations of IEC-60825, FDA 21 CFR 1040.10, and
FDA 21 CFR 1040.11.
Number/type
Input .................................... 1 singlemode or multimode fiber optic
Output ................................. 8 singlemode or multimode fiber optic
Connectors ..................................... 8 LC connectors
Operating distance ........................ 30 km (18.75 miles) with singlemode (SM)
cables
0.15 km (492') with multimode (MM)
cables
N Operating distance is approximate. These are typical
distances. The maximum distance may be greater than these
typical numbers depending on factors such as fiber type, fiber
bandwidth, connector splicing, losses, modal or chromatic
dispersion, environmental factors, and kinks.
Nominal peak wavelength........... 850 nm for MM model,
1310 nm for SM model
Data rate ......................................... 4.25 Gbps
Transmission power
Singlemode ......................... -5 dBm, typical
Multimode .......................... -5 dBm, typical
Maximum receiver sensitivity
Singlemode ......................... -18 dBm, typical
Multimode .......................... -12 dBm, typical
Optical loss budget
Singlemode ......................... 13 dB, maximum
Multimode .......................... 7 dB, maximum
Control/remote
Serial control ports ........................ 1 RS-232, 3.5 mm captive screw connector,
3 pole (rear panel)
1 RS-232, 2.5 mm mini stereo jack
(front panel)
Baud rate and protocol ................. 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations . Captive screw connector: 1 = TX, 2 = RX,
3 = GND
Mini stereo jack: tip = TX, ring = RX,
sleeve = GND
Program control ............................. Extron's control/configuration program
for Windows ®
Extron's Simple Instruction Set (SIS ™ )
General
Power .............................................. 100 VAC to 240 VAC, 50-60 Hz, 20 watts,
internal
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling ........................................... Convection, vents on top and sides
Mounting
Rack mount ........................ Yes, with optional 1U, 9.5" deep rack shelf)
Furniture mount ................ Yes, with optional under-desk mounting
kit and through-desk mounting kit
Enclosure type ............................... Metal
Enclosure dimensions ................... 1.7" H x 8.7" W x 9.5" D
(1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
(Depth excludes connectors.)
Product weight .............................. 2.3 lbs (1 kg)
Shipping weight ............................ 4 lbs (2 kg)
Vibration ......................................... ISTA 1A in carton
(International Safe Transit Association)
Regulatory compliance
Safety ................................... CE, CUL, UL
EMI/EMC .......................... CE, C-tick, FCC Class A, FDA Class 1,
ICES, VCCI,
MTBF ............................................... 30,000 hours
Warranty ......................................... 3 years parts and labor
N All nominal levels are at ±10%.
N Specifications are subject to change without notice.