Command/response table for sis commands, Remote contr ol, cont’d – Extron electronic Fiber Optics Fox 4G DA8 User Manual
Page 15
FOX 4G DA8 • Remote Contr
ol
Remote Contr
ol, cont’d
3-6
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional description
Channel mute
N
The channel mute commands mute the data on the output only. The output continues to emit light.
Mute output
X!
*1B
Vmt
X!
*1
]
Blank data on optical output
X!
.
Unmute output
X!
*0B
Vmt
X!
*0
]
Output data on optical output
X!
.
Show video mute status
X!
B
X@]
Output
X!
's data output mute status is
X@
(0 = unmuted, 1 = muted).
Mute all outputs
1*B
Vmt1
]
Blank data on all optical outputs.
Unmute all outputs
0*B
Vmt0
]
Output data on all optical outputs.
Show mute status of all
outputs
E
VM
}
X@
1
X@
2
X@
3
X@
4
...
X@
8
]
Show output 1 through output 8 mute status.
Information requests
Information request
I
V01X08•A00X00
]
V01X08 shows the number of available inputs (1) and
outputs (8) for this product.
A00X00 has no meaning for this product.
Show firmware version
Q
X#]
Example:
Q
1.23
]
The factory-installed FOX 4G DA8 controller firmware
version is 1.23 (sample value only).
Request part number
N
60-927-nn
]
nn
indicates the transmission mode.
01 = multimode, 02 = singlemode.
Show input connections
status
0LS
X$]
0000000 = no light on the input,
10000000 = light received.
Show temperature
20S
X%]
X%
= degrees Fahrenheit.
Show transceiver module
status
0*1I
X^
1
X^
2
X^
3
X^
4
...
X^
8
]
Show all installed transceiver modules.
0 = none, 1 = multimode, 2 = singlemode.
Command/response table for SIS commands