Elmo P100 - Manual (Page 34)

83
VARIOUS
FUNCTIONS
AND OPERATIONS
ENGLISH
Image Selection
Each time the [ ], [ ] button and [ ] button
on the front operating panel or wireless remote
control are pressed, the image is switched among
the camera image, the image inputted in the analog
RGB input terminal [RGB IN] and the image stored in
the SD card.
When the PC or other unit is connected to the analog
RGB input terminal [RGB IN], the output image can
be switched without spending time and labor
exchanging the connection cables.
The image from the DVI output terminal [DVI OUT]
cannot be switched to [RGB IN] image.
The display mode of the image from the video output
terminal [VIDEO OUT] cannot be switched when [Video
Out] is set to [Camera & SD] on the OSD.
If the image mode switching is tried to the SD mode
when an SD card is not in this product, the screen will
turn black.
By setting [Guide] to [On] on the OSD, the setting
contents are displayed on the screen.
P.61
Front operating panel
Wireless remote control
Wireless remote control