Elmo P100 - Manual (Page 15)

64
PART NAMES
AND
FUNCTIONS
ENGLISH
* [ ] indicates the factory default settings. The factory default settings of Flickerless vary
according to the destination. The settings of USB Mode and Flickerless retain the last set
state.
■ SD Mode (Menu when image stored in an SD card is in display)
Name
Function
Top hierarchy 2nd hierarchy 3rd hierarchy
Delete
Current No To cancel the delete
(Delete) (Selected Image) Yes To delete the image in display on the full screen or the
image selected from the split screen.
Locked image can not be deleted.
All (All images) No To cancel the delete
Yes To delete all images
Lock Current To lock the image in display on the full screen or the
(Lock) (Selected image) image selected from the split screen.
Can set the image not to be deleted or select image for
slide-show.
On the split screen, a green frame appears on the locked
image.
All (All Images) To lock all image files. Can select the delete-protected
image or the image to be displayed on the slide show
Unlock Current To release the lock of the image in display on the full
(Lock Release) (Selected Image) screen or the image selected from the split screen
All (All Images) To release the lock of all image files
Format Format No To cancel the format
Media (Initialize) Yes To format the SD card
(Initialize)
Since all records in the SD card will be cleared, use this
function carefully.
P.77
P.77
Sample image of the 1st,
2nd and 3rd hierarchies
OSD (On-Screen Display)
(Continued)
White Balance
R-Gain
B-Gain
Iris
Edge Effect
Gamma
Auto/One-Push
Manual
Top hierarchy
2nd
hierarchy
No
Yes
3rd
hierarchy
Name
Function
Top hierarchy 2nd hierarchy
Flickerless 60Hz To reducer fluorescent lamp flicker due to power supply
(Flicker compensation) 50Hz frequency