Elmo P100 - Manual (Page 14)

ENGLISH
PART NAMES
AND
FUNCTIONS
63
OSD (On-Screen Display)
The menu items displayed/selected on the monitor or the projection screen are referred to as
"OSD (On-Screen Display)".
When the [MENU] button on the wireless remote control is pressed, the OSD menu appears on
the monitor screen. (When this [MENU] button is pressed again, the OSD menu disappears.)
Move to the item to be set by pressing the [
] direction buttons on the wireless remote
control, and press the [ENTER] button to fix the setting. When the [ ] direction button is pressed,
the OSD menu hierarchy is traced back. When the same button is pressed on the first hierarchy,
the OSD menu disappears.
Brightness
Mode
White Balance
R-Gain
B-Gain
Edge Effect
Gamma
Guide
Auto
Manual
Top hierarchy
2nd hierarchy
■ Camera Mode (Menu when camera image is in display)
Sample image of the top and 2nd hierarchies
Name
Function
Top hierarchy 2nd hierarchy
Brightness Auto To vary the degree of brightness automatically according
(Brightness) to the object
Manual To fix the image brightness to any level
Mode Text3 Text1, Text2 and Text3 are used to display B&W characters and documents
(Mode) Text2 sharply. The larger the number affixed to Text is, the larger the effect is.
Text1 Graphics is used to display color figures and photographs
Graphics cleanly. Only when Graphics is selected, Edge Effect and
Gamma can be set.
White Balance Auto To set the white balance to automatic following
(White Balance) One-Push To set the white balance to fix
Manual To adjust the red intensity and the blue intensity manually
R-Gain (Displayed in level bar form) To adjust the red intensity when the white balance is set to manual
B-Gain (Displayed in level bar form) To adjust the blue intensity when the white balance is set to manual
Edge Effect 3 This can be set only when the mode is set to Graphics.
(Edge Effect) 2 Edge enhancement is provided to the image to make it
1 sharp. The larger this number is, the larger the effect is
Off
Gamma High To set the gamma curve when the mode is set to Graphics
(Gamma) Normal The grayscale can be varied as you like.
low
USB Mode Mass Storage (Transfer) To transfer the data from an SD card into the USB-
(USB Mode Select) connected PC
Application (Application) To control the main unit from the USB-connected PC or
transfer image into the PC
Guide On To set whether the operation status of the main unit should
(Guide) Off be displayed.
Video Out All Mode (All mode) To output the [VIDEO OUT] terminal signal according to
(Video Output Set) all video switching
Camera & SD To limit the switching of the [VIDEO OUT] terminal output
(Image of Camera & SD only) to the camera video and the SD mode
Call (Setup call) Default To reset to the default factory-setting (Excluding USB Mode and Flickerless)
P.87
P.79
P.87
P.78