Elmo P100 - Manual (Page 29)

78
OPERATION PROCEDURE
ENGLISH
Presentation using the supplied software
with the USB-connected PC
Set [USB Mode] to [Application] on the OSD.
"Utility Software" is available from the supplied CD-ROM supplied from us.
"Utility Software" contains PC link software "Image Mate for Presentation" and TWAIN driver
"ELMO TWAIN DS" (VHN) to allow the following operation:
• Transfer of moving/still images to the PC
• Operation of this product from the PC
A PC that Microsoft Windows2000 (SP4 or newer) or XP (SP2 or newer) has been installed is
recommended.
For details, refer to the "Utility Software" Installation Manual and the help folder with the
software.
When the front operating panel or the wireless remote control is in operation, do not connect/
disconnect the USB cable, or malfunction will be caused to this product.
The USB cable compliant with USB2.0 is recommended.
When this camera is connected with the PC with a USB cable, the camera image frame rate lowers.
Depending on the USB environment used by the PC or the influence of peripheral units, the video transfer
could be disturbed.
This does not guarantee the normal operation in any environment.