Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 88)

English
88
Display status page
Click [Status ] → [ Display status].
This page displays the Display statuses established for
the items shown below.
Displays the type of Display.
Displays the firmware version of the Display main
unit.
Network status page
Click [Status ] → [ Network Status].
Displays the current configuration information of the
network.
Displays the configuration details of wired LAN.
Basic control page
Click [Display control ] → [ Basic control].
Power On/Off control
Use these to select the input signals
AUDIO mute
Switches aspect mode
Detail control page
Click [Display control ] → [ Advanced control].
Enter a command. Use the same command used for
the serial control.
Response from the unit is displayed.
Command is sent and run.
Note
● After the settings are changed, it may take a while till
the display status is displayed.
Change Use name / Password page
Click [Change password].
1
2
Administrator
User
■
Administrator mode
1
2
3
4
5
6
7
Account
Current user name input field
Current password input field
New user name input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change