Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 20)

English
20
Daisy chain connection
It is possible to daisy chain multiple displays when
displaying the picture on multi screen, etc.
DIGITAL LINK
First display
Second display
Third display
Note
● It is possible to daisy chain up to 10 displays.
However, the number of connectable displays may be
limited depending on the cables, signals, the devices
used, etc.
● When inputting HDCP signal, it is possible to daisy
chain up to 8 displays.
● The DVI-D output function is enabled only for the
DVI-D input.
This is not output if the HDMI or DIGITAL LINK input
is selected. When using the daisy-chain connection
method, all the displays should be in the state where
the picture is displayed via DVI-D IN.
Pin assignments and signal names for DVI-D
Input/Output
Pin No. Signal Name
T.M.D.S. data 2-
T.M.D.S. data 2+
T.M.D.S. data 2 shield
DDC clock
DDC data
T.M.D.S. data 1-
T.M.D.S. data 1+
T.M.D.S. data 1 shield
+5 V DC
GND (Ground)
Hot plug detect
T.M.D.S. data 0-
T.M.D.S. data 0+
T.M.D.S. data 0 shield
T.M.D.S. clock shield
T.M.D.S. clock+
T.M.D.S. clock-