Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 87)

87
English
Access from Web Browser
Access to the TOP screen of the Web browser control
using a Web browser.
1 Start your Web browser.
2 Enter the IP address set with the
[LAN setup] of the unit.
(see page 59)
3 Enter the user name and password
when the Authentication screen is
displayed.
4 Click [OK].
After logged in, the TOP screen of the Web Browser
Control is displayed.
Note
● The password used here is the same password
used for command control and the PJLink security
authentication.
● Default user name and password are as follows:
User name: dispuser (user rights)
dispadmin (administrator rights)
Password: @Panasonic
Change password first.
In case the warning screen is displayed when you log
in with the factory default user name and password,
click the [Continue] button.
● The password can be changed on the Password
Setup screen after logging in (see page 88). Log in
with administer privileges to change this.
● If a wrong user name/password is entered 3 times
when you log in, the field will be locked for several
minutes.
● When using “Crestron Connected™” (see page 92),
log in with the administrator rights.
● Under no circumstances, Panasonic Corporation or
its associated companies will ask customers their
password directly.
Even if you are asked directly, please do not reveal
your password.
Operating with Web Browser
■
WARNING display page
In case the following warning page is displayed when
you log in with the factory default user name and
password, click the [Continue] button to display the
[Display Control Window] page.
Note
● It is recommended to change password on the
[Change password] page.
● Depending on the browser, displayed operations may
change.
■
Description of each section
Page tab
Click these to switch pages.
[Status]
Click this item, and the status of the Display is
displayed.
[Display control]
Click this item to display the Display control page.
[Detailed set up]
Click this item to display the advanced settings
page.
[Change password]
[Crestron Connected™]
Click this item to display the Crestron Connected™
operation page.
[Browser Remote Control]
Click this item to display the Browser Remote
Control on the WEB browser, which is the same as
the supplied remote control.