Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 73)

73
English
Maximum VOL function
Enables/Disables [Maximum VOL function].
[Off]:
The sound volume level can be set up to 100
(maximum).
[On]:
The volume cannot be set to the level higher than
the level set for [Maximum VOL level].
Maximum VOL level
Sets the sound volume when [Maximum VOL function]
is enabled.
Note
● Outputs with the set volume when [Maximum VOL
level] in [On] state is selected on the menu.
● When the [Maximum VOL function] is switched from
[Off] to [On], if the [Maximum VOL level] is set lower
than the [Initial VOL level], the [Initial VOL level]
automatically becomes the same as the [Maximum
VOL level].
Input lock
Locks the input switch operation.
[Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK] / [DVI-D]
/ [PC] / [VIDEO] / [USB] / [MEMORY VIEWER]
Note
● Input switch can be used when this is set to [Off].
Button lock
Limits operation of the buttons on the unit.
[Off]:
All the buttons on main unit can be used.
[On]:
All button operations except for the
On / Off button> are disabled.
[MENU & ENTER]:
Locks
buttons.
■
To set [Button lock]
Set with the buttons on the unit.
[Off]:
Press <+ (Unit)> for 4 times.
Press for 4 times.
Press <- (Unit)> for 4 times.
Press .
[On]:
Press <- (Unit)> for 4 times.
Press for 4 times.
Press <+ (Unit)> for 4 times.
Press .
[MENU & ENTER]:
Press for 4 times.
Press <+ (Unit)> for 4 times.
Press for 4 times.
Press .
Note
● About how to reset the settings to defaults:
“Initialization” (see page 77)
Controller user level
Limits operation of the buttons on the remote control.
[Off]:
You can use all of the buttons on the remote control.
[User1]:
You can only use ,
, , , and
buttons on the remote control.
[User2]:
You can only use on
the remote control.
[User3]:
Locks all the buttons on the remote control.
Note
● About how to reset the settings to defaults:
“Initialization” (see page 77)