Bosch VG4-A-PSU1 Power Supply Unit for CCTV Cameras - Manual (Page 3)

Power Supply Units (AUTODOME7000, MIC7000
cameras)
Table of contents | en 3
Bosch Security Systems, Inc. Installation Manual 2020-10 | |
Table of contents
1 Safety 4
1.1 Safety precautions 4
1.2 Important safety instructions 4
1.3 Important Notices 5
1.4 UL certification 6
1.5 Bosch notices 6
2 Unpacking 8
2.1 Parts List 8
2.2 Optional Parts List 8
2.3 Tools Required 8
3 Description 9
4 Pre-installation Check List 10
5 Mount Power Supply Box (Wall, Mast (Pole), and Corner Mounts) 12
6 Attach Cover Door to Power Supply Box 14
7 Route Wires and Attach Connectors 15
7.1 Methods for Routing Wires (AUTODOME Cameras ONLY) 15
7.2 Power Supply Box Connections 17
8 Wiring the Power Supply Box 19
9 Video and Control Cables (AUTODOME VG5-600 Camera Models ONLY) 20
9.1 Using Coaxial Cable to Transmit Video and Control 20
9.2 Using UTP to Transmit Video and Control 20
9.3 Using Ethernet to Transmit Video and Control 21
9.4 Using Multi-mode Fiber Optic to Transmit Video and Control 21
9.5 Using a Fiber Optic Ethernet Media Converter to Transmit Video and Control 22
9.6 Controlling the AUTODOME via Biphase 22
9.7 Controlling the AUTODOME via the RS232 Protocol 24
9.8 Controlling the AUTODOME via the RS-485 Protocol 25
10 Fiber Optic Module with an RS232/RS422 Controller (AUTODOME VG5-600 Camera
Models ONLY) 28
10.1 Connecting to an LTC 4629 Head End Data/Video Transceiver 28
10.2 Configuring the VG5 AUTODOME Camera 28
11 Audio Cables (AUTODOME Cameras ONLY, except VG5-600 Models) 31