Bosch VG4-A-PSU1 Power Supply Unit for CCTV Cameras - Manual (Page 11)

Power Supply Units (AUTODOME7000, MIC7000
cameras)
Pre-installation Check List | en 11
Bosch Security Systems, Inc. Installation Manual 2020-10 | |
!
Warning!
External mains power cables are to be installed in accordance to NEC, ANSI/NFPA70 (for US
application) and Canadian Electrical Code, Part I, CSA C22.1 (for CAN application) and in
accordance to local country codes for all other countries.
Branch circuit protection incorporating a 20 A, 2-pole Listed Circuit Breaker or Branch Rated
Fuses are required as part of the building installation. A readily accessible 2-pole disconnect
device with a contact separation of at least 3 mm must be incorporated.
5. Purchase the appropriate mounting hardware to use, depending on the location of the
power supply box.