Updating firmware for the docking monitor – HP E27d G4 27" 16:9 Advanced Docking IPS Monitor User Manual

Page 37

Updating firmware for the docking monitor

To update the docking monitor firmware while connected to your computer:

Open Windows Explorer and navigate to where you saved the HP firmware installer.

Double-click HPFirmwareInstaller.exe.

Verify that updates are available, and then select which updates to install.
You must be connected to the Internet for new updates to download to the HP firmware installer.

Select one of the following:

●

Update now: Installs the update immediately.
Do not disconnect your computer from the docking monitor during an update. You might see your

monitor flicker and hear some audio clicks, your Internet connection might be intermittent, and

your mouse and keyboard could become unresponsive until installation is complete.

●

Update on dock disconnect: Installs the update after you disconnect your computer from the

docking monitor.
Do not connect your computer to the docking monitor during an update. The dock power light

might blink while the update is being installed.

Select Install.

Updating the docking monitor