HP E27d G4 27" 16:9 Advanced Docking IPS Monitor - Manual (Page 31)

1. Press the Menu button to open the OSD menu.
2. Select Menu, select Assign Buttons, and then select one of the available options for the button that you
want to assign.
Changing the power mode setting
To comply with international power standards, when the monitor is in sleep mode, the monitor’s default
setting is Power Saver mode. If your monitor supports Performance mode, then to keep the USB ports
enabled when the monitor is in sleep mode, change the power mode setting from Power Saver mode to
Performance mode. Enabling Performance mode increases power consumption.
NOTE: When the power mode is set to Performance, the USB hub, USB ports, and USB Type-C video input
remain on, even when the monitor is in sleep mode.
When the monitor detects a USB Type-C cable, the monitor automatically switches the Power Mode to
Performance and remains there until you manually switch back to Power Saver mode.
The monitor remains in Performance mode after a factory reset is performed and Alt mode is detected as
active.
To change the power mode setting:
1. Press the Menu button to open the OSD menu.
2. Select Power, select Power Mode, and then select Performance.
3. Select Back and close the OSD.
Power states
The monitor power behavior is based on host computer power settings (sleep, hibernation, shut down, and
restart). If the computer initiates sleep or hibernation, the monitor turns off. When the computer exits sleep
or hibernation, the connected monitor returns to the previous monitor settings. If you restart or shut down
the computer and then turn it back on, the connected monitor returns to the previous monitor settings.
Table 5-3 Power states
Description Status
Monitor power light status indicator On: White
Sleep: Amber
Monitor connected to computer power light status indicator Monitor and computer On: White
Monitor and computer in sleep state White (blinking)
Using the camera
Gently pull up the camera to unlock it by using the grips on the back of the camera.
Changing the power mode setting 23