HP E27d G4 27" 16:9 Advanced Docking IPS Monitor - Manual (Page 24)

Installing a security cable
You can secure the monitor to a fixed object with an optional security cable available from HP. Use the key
provided to attach and remove the lock.
Turning on the monitor
This section provides important information about preventing damage to your monitor, startup indicators,
and troubleshooting information.
IMPORTANT: Burn-in image damage might occur on monitors that display the same static image on the
screen for 12 or more hours. To avoid burn-in image damage, you should always activate a screen saver
application or turn off the monitor when it will not be in use for a prolonged period of time. Image retention is
a condition that might occur on all LCD screens. Burn-in damage on the monitor is not covered under the HP
warranty.
NOTE: Pressing the power button on the monitor also turns a docked notebook on and off.
When the monitor is first turned on, a monitor status message is displayed for 5 seconds. The message shows
which input is the current active signal, the status of the auto-switch source setting (On or Off:; default
setting is On), the current preset display resolution, and the recommended preset display resolution.
The monitor automatically scans the signal inputs for an active input and uses that input for the display.
1. Press the power button on the computer to turn it on.
2. Press the power button on the bottom of the monitor to turn it on.
16 Chapter 2 Setting up the monitor