HP E27d G4 27" 16:9 Advanced Docking IPS Monitor - Manual (Page 12)

CAUTION: To reduce the risk of personal injury, adjust the source device volume before using headphones,
earbuds, or a headset. For additional safety information, see the Product Notices provided in your
documentation kit.
Table 1-1 Rear and side components and their descriptions
Component Description
(1) USB SuperSpeed ports (2) Connect USB cables to peripheral devices, such as a keyboard, mouse, or USB hard drive.
(2) Audio-out (headphone) jack/
Audio-in (microphone) combo
jack
Connects optional headphones, earbuds, a headset, or a television audio cable.
WARNING! To reduce the risk of personal injury, reduce the volume before using
headphones, earbuds, or a headset. For additional safety information, see the Product
Notices provided in your documentation kit.
(3) Security cable slot Connects an optional security cable.
(4) Master power switch Turns on or off all power to the monitor.
NOTE: To place the monitor in the lowest power state when it is not being used, turn
the Master power switch to the Off position.
(5) Power connector Connects an AC adapter.
(6) HDMI port Connects an HDMI cable to a source device such as a computer or game console.
(7) DisplayPort connector Connects a DisplayPort cable to a source device such as a computer or game console.
(8) USB Type-C port Connects the DisplayPort cable to a source device such as a computer or game console.
NOTE: Your computer's USB Type-C port must be able to support USB Type-C DP Alt
Mode and data and power delivery.
(9) DisplayPort OUT connector Connects a DisplayPort cable to a secondary monitor for daisy-chaining.
(10) USB Type-C downstream port Connects a USB Type-C cable to a peripheral device, such as a keyboard, mouse, or USB
hard drive.
(11) RJ-45 (network) jack Connects a network cable.
(12) USB SuperSpeed ports (2) Connect USB cables to peripheral devices, such as a keyboard, mouse, or USB hard drive.
NOTE: When HDMI or DP input is active, the monitor is in monitor mode. When USB Type-C Alt Mode is active, the monitor is in dock
mode.
Front components
To identify the components on the front of the monitor, use this illustration and table.
4 Chapter 1 Getting started