HP E27d G4 27" 16:9 Advanced Docking IPS Monitor - Manual (Page 15)

2 Setting up the monitor
It is important to set up the monitor correctly in order to avoid serious injury or damage to the monitor.
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the Web at http://www.hp.com/ergo .
IMPORTANT: To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
panel can cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will
not recover to its normal condition.
IMPORTANT: To prevent the screen from getting scratched, defaced or broken and to prevent damage to the
control buttons, position the monitor facedown on a flat surface covered with protective sheet foam or a
nonabrasive cloth.
Attaching the monitor stand
Correctly attaching your monitor stand is critical for safe use. This section describes how to safely attach a
stand.
1. Position the monitor facedown on a flat surface covered by a soft clean cloth.
2. Slide the top of the mounting plate on the stand under the upper lip of the recess in the back of the
monitor head (1).
3. Lower the bottom of the stand's mounting plate into the recess (2) until it snaps into place. The latch on
the bottom of the mounting plate pops up when the stand is locked in place.
Mounting the monitor head
The monitor head can be attached to a swing arm or the stand.
7