Eizo DuraVision FDF2382WT-A 23" Multi-Touch Display (Black) User Manual
Page 15
Touch Panel Settings | 3
15
2. Click "Hardware and Sound" - "Tablet PC Settings".
The "Tablet PC Settings" screen appears.
3. Click "Setup" in the "Display" tab.
A touchscreen specification screen with a white background is displayed.
Attention
• If using the monitor in a multiple monitor environment, specify the touchscreen according to the
message displayed on screen.
4. Touch the screen with your finger.
The screen that is touched is recognized as the touch screen.
5. Click "Calibrate".
A white screen appears in the background.
Attention
• If using the monitor in a multi-monitor environment, select the monitor to be used for correcting
the touch position in the "Display" pull-down menu, and then click "Calibrate".
6. Touch the touch marker (cross) with your finger for a few seconds and then release your
finger.
The touch marker appears on the screen in 16 locations, starting from the top left to top
right, and then down to the bottom left to bottom right.
Note
• For second or subsequent calibrations, the touch marker appears in 4 locations. If you want to
display the touch markers in 16 locations again, press "Reset" in the "Tablet PC Settings".
7. When you have finished correcting the touch position, click "Yes" and save the
adjustment data.
8. Click "OK" to close the screen.