3 touch panel settings, 1 setting up the touch panel, 2 correcting the touch position – Eizo DuraVision FDF2382WT-A 23" Multi-Touch Display (Black) User Manual
Page 14: Setting up the touch panel, Correcting the touch position
3 | Touch Panel Settings
14
3 Touch Panel Settings
3.1 Setting Up the Touch Panel
The touch panel functions of this product differ according to the driver used and the driver
setup. Set it according to your application.
Function
Windows standard
driver
Dedicated touch panel driver (DMT-DD)
*1
Driver installation
Not required
Required
Touch sound output
×
✓
Multiple connections
*2
✓
*3
✓
Operation mode
Touch digitizer
*4
Touch digitizer
*4*5
Mouse emulation
*5
Multi-Touch operation
✓
✓
×
*1
*2
Two or more of this monitor can be connected to a PC
*3
Windows 11 / Windows 10 only
*4
Touch operations may not be recognized in applications designed using mouse emulation.
*5
For more information about the setup procedure, refer to the User’s Manual of the touch panel
driver.
Note
• After completing the settings, run the "TPOffset" software and adjust the sensitivity of the touch
panel. TPOffset can be downloaded from our web site (
).
If using a Windows standard driver, see the following for the settings.
3.2 Correcting the Touch Position
This correction is for aligning the touched position with the position of the cursor displayed in
response to touch.
Attention
• The monitor is easily affected by large conductive materials, so please keep hands and metallic
objects away from the screen.
• If the "User Account Control" dialog box displays during operation, follow the screen instructions.
1. Open the Windows control panel.
How to open differs depending on the operating system.
Windows 11
From the start menu, select "All apps" - "Windows Tools" - "Control Panel".
Windows 10
From the start menu, select "All Apps" - "Windows System" - "Control Panel".
Windows 8.1
Click
at the bottom of the "Start" screen. The "App" screen appears.
In "Windows System", click "Control Panel".