Erica Synths LXR Eurorack Drum Module (28 HP) - Manual (Page 7)

On the detail page you can see the full name of the parameter and change its value using the
encoder. This is good for fine adjustments, where the knob control is too coarse. By pushing the
encoder again, you return to the normal menu mode.
3. Memory management
3.1. SD Card
The memory card is used as non volatile storage. Without a memory card you are not able to save
your work!
3.2. Kits
A kit contains the instrument data for the 6 Voices. All synthesis parameters are stored here. Kits are
stored as .SND binary files inside the Project00 folder on the SD card.
4. Voices
The LXR offers 6 voices. They are optimized for different kinds of drum sounds. The type of a
voice can not be changed. There are 3 drum voices, a subtractive clap/snare voice, a FM percussion
voice and a hi-hat voice. In this chapter a diagram of the synthesis structure is shown for each voice
type, then the parameters are explained. Let's take a closer look at the voice types.
LXR Owners Manual - 7 -